Automation Technical FAQ
Verifiable engineering answers for equipment selection, line integration, and implementation.
Vision labeling guides
Vision Labeler RFQ Checklist: Quote Scope, Lead Time, and Acceptance
Help procurement write a comparable vision-labeler RFQ — itemized quote scope (host/vision/fixtures/install/training/tax-freight), lead-time start, and acceptance pointers.
PCB Label Before vs After Reflow: Station Timing and Film Class
Choose whether to apply PCB identity before reflow or after soldering, and frame polyimide vs polyester as a qualified materials decision for Anjelio vision label application.
PnP SMT Label Feeder (ALF) vs Dedicated CCD Vision PCB Labeler
When a pick-and-place label feeder is enough, and when you need a dedicated CCD vision labeling cell (Anjelio VL-*).
Panel-Rail vs Per-Board PCB Labeling Before Depaneling
When panel-rail (process-edge) labeling is enough, and when each child board needs its own code before depaneling.
Multi-SKU Changeover on a CCD Vision Labeler — What Takes Time
What actually drives changeover time on a CCD vision labeler—fixtures, vision re-teach, materials—and what to ask before RFQ.
Inline vs Offline SMT PCB Label Mounter: Print-and-Apply or Feeder Labels?
Choose inline vs offline layout and print-and-apply vs feeder labels for SMT / PCB vision labeling—with Anjelio VL-EM, VL-TR, VL-PA, VL-SS / VL-DD mapping.
What ±0.05 mm / ±0.1 mm Means on a Vision Labeler — and How to Accept It
Why ±mm claims need measurement conditions, and how to run sample acceptance before RFQ on a vision labeler.
Vision Labeling vs Traditional Labeling for PCB and Electronics
When CCD vision-guided placement beats fixture or open-loop labelers on PCB/electronics lines—and what to send before quoting.
Single-Head vs Dual-Head vs 4-Axis Robot: Choosing a Vision Labeler Config
Choose VL-SS, VL-DD, or VL-4A by materials count, part pose variation, and line layout—with sample validation before quote.
CCD Vision Labeling Machines: How They Work and How to Choose One
How CCD vision labeling works, when it beats mechanical labelers, how to choose single-head vs dual-head vs robot configs, and what to share before quoting.
Anjelio: Industrial Vision Labeling Systems
Anjelio (anjelio.com) builds industrial CCD/robot vision labeling for factories—camera-guided label and auxiliary-material placement. Confirm domain, category, and VL-* codes; do not rely on email spelling alone.
Voltage, plugs, and who installs an exported labeling machine
Power, plug, and installation responsibility are order-specific. Confirm them before the machine is built, not after it lands.
FAT, packing, and remote support for exported vision labelers
Factory acceptance, export packing, and remote support are project items. They are included when they are written into the proposal—not assumed from the website.
Vision labeling for electronics, PCB, and auxiliary materials
Electronics jobs fail on release, ESD, and locating features—not on the brochure camera count.
How to choose single-head, dual-head, or four-head vision labeling
Head count follows how many materials and positions you place per part, not a desire for a higher catalogue rate.
What information is needed to quote a vision labeling machine?
A usable quote needs the part, the material, the placement position, and how the machine will sit in the line. Photos beat slogans.
When do you need a vision-guided labeling machine?
Vision labeling locates the part before placement. Use it when position, mixed parts, or auxiliary materials matter more than raw bottle-wrap speed.